MP3 player example

Introduction

This is an example that demonstrates a large application for Lightfoot being built from within eclipse. It requires the multimedia adapter board  in order to work, and connects to a JReceiver server to retrieve MP3 tracks to play.
Make sure that you have already run the eclipse example.

Building the example

Import the project into eclipse and rebuild the project.

Running the example

To run the example on the board
    lfflash --flash --mode=xip build\nondebug\mp3player.raw

Reset the board to start the application up. You need to make sure that you have a JReceiver server configured on your network, and then connect to the board using a web browser to configure the address of the JReceiver server. (http://<ip address of board>).  Once you have configured the JReceiver address, reset the board again it will start up and connect to the board.

Features

This example demonstrates the following SDK features.